PROMO
ANI BLACK/S H2 TMD1 CLICK - PROFESSIONAL airbrush for painting with HOT SYSTEM - NYLON UPPER CUP - IN CASE - Spray Guns - Ani
Pagamento dilazionato solo per acquisti online
Se preferisci accettiamo anche bonifico bancario o carte
PROFESSIONAL AIRBRUSH WITH HOT SYSTEM FOR PAINTING IN A CASE
| ANI BLACK/S H2 TMD1 CLICK |
|---|
 
|
- Airbrush for painting with 600cc upper cup
- Nylon cup with drip-stop device and paint filter FV/S-5000; 3/8M BSP thread
- H2 compressed air heating system
- Airbrush air supply connection 1/4M BSP swivel
- Digital thermomanometer TMD1 (scale bar ÷ °C)
- Available with CLEAR , HPS or WB technology
- Packaged in a nylon case with brush, spare parts kit, brushes and service key for maintenance
Instructions and spare parts (PDF) - Setting parameters (PDF)
| COD. | MOD. | NOZZLE |
|---|---|---|
| AH141701 | CLEAR | ø 1.0 |
| AH141702 | CLEAR | ø 1.2 |
| AH141703 | CLEAR | ø 1.3 |
| AH141704 | CLEAR | ø 1.4 |
| AH141705 | HPS | ø 1.5 |
| AH141706 | HPS | ø 1.7 |
| AH141707 | HPS | ø 1.9 |
| AH141710 | WB | ø 1.2 |
| AH141711 | WB | ø 1.3 |
| AH141712 | WB | ø 1.4 |
The H2 system for air heating allows you to work without the problems that the use of cold air can cause.
The gun with H2 system is easy to use, just connect it to the air system and, shortly after, the operator can already start working, taking advantage of all the advantages that hot air brings.
The use of hot air in fact, considerably improves the quality of the painting, reduces the application time, uses less product obtaining a saving of up to 20%, shortens the drying times of water-based paints, increases the mirror effect and there is no risk of the orange peel result.
Built with quality materials, the H2 system is able to heat the outgoing air up to 40° C, the operator can control the temperature via the regulator at the base of the hot air device. It has no electrical heating component, it is in fact a completely pneumatic system, however it is ready for work in a very short time.
-
WORKING TEMPERATURE : -10°C [253°K], +90°C [343°K]
-
THREAD ON BODY : 1/4F BSP Gas cylindrical
-
MAXIMUM PRESSURE : 7 bar [101.5 psi]
- DIMENSIONS : 169 x 228 x 49 mm [6.65 x 8.98 x 1.93 inch]
Dear Customer,
We would like to inform you that our online store will be operating at a reduced rate during the month of August. Our offices and headquarters in Cinisello Balsamo will be closed from August 4th to 24th inclusive.
E-commerce orders will be processed starting August 25, 2025. Therefore, for urgent products, we invite you to always check the actual availability in stock.
For any information , you can contact us by email at info @colombodistribuzionesrl.it or by phone at 02 612 94385 and 02 871 76032.
We wish you happy holidays!
